Download categories
Contact us
- Add: 6th Floor, Teli Building, Shuibei 2nd Road, Luohu District, Shenzhen
- Tel: +86-755-25622848
- Fax: +86-755-25622848-806
- Email: {Lankecms_email}
Troubleshooting Axis cameras-Understanding camera LEDs
When troubleshooting an Axis network camera, the camera LEDs can be a very useful source of information. Different models have different LED setups, but here we’ll use the AXIS P1365 as an example.
This model has three LEDs: one for status, one for power and one for network. Each LED can show different colors.
The status LED
A steady green light means normal operation
A steady amber light is shown during startup, during a reset to factory defaults or when restoring settings
A slowly flashing red light indicates a failed firmware upgrade
Figure 1: Steady green means normal operation. Steady amber is shown during startup, during a reset to factory defaults or when restoring settings. A slow red flash indicates a failed firmware upgrade.
The power LED
A steady green light means normal operation
The light flashes green/amber during a firmware upgrade
Figure 2: Steady green means normal operation. Flashing green/amber for a firmware upgrade.
The network LED
Steady green when connected at 100Mb/s. Flashes on network activity
Steady amber when connected at 10Mb/s. Flashes on network activity
Unlit when there is no network connection
Figure 3: Steady green when connected at 100 Mb/s. Flashes on network activity. Steady amber when connected at 10 Mb/s. Flashes on network activity. Unlit when there is no network connection.
